3M Resin In-line Splice Kits – MESA
Di uno scrittore di uomini misteriosi
4.5 (408) In Magazzino
Scotchcast Resin Splicing Kits While crimpits and split bolts mechanically splice buried wires on cathodic protection systems, a connection is not complete until it is sealed against moisture and corrosive chemicals. Scotchcast splicing kits provide this protection. They are packaged with all the materials necessary fo
Scotchcast Resin Splicing Kits
While crimpits and split bolts mechanically splice buried wires on cathodic protection systems, a connection is not complete until it is sealed against moisture and corrosive chemicals. Scotchcast splicing kits provide this protection. They are packaged with all the materials necessary for encapsulating wire connections to provide total electrical insulation. The main component of the Scotchcast kit is a two-part epoxy resin. Because the resin is packaged in a specially designed mixing pouch, field installations are greatly simplified. The packaging ensures proper mixing ratios and makes clean-up unnecessary. Each kit is also provided with molded plastic forms and 3M electrical insulating tape to surround the wire splice. Once the resin is properly mixed, it is simply poured into the plastic form. The resin cures in approximately 30 minutes to provide a moisture-tight seal and electrically insulated splice.
Scotchcast kits are available for a wide range of wire configurations. When odd-sized or odd-shaped splices must be protected, multi-mold kits should be used. These kits are designed to handle almost any type of splice configuration. Each kit is provided with the same components as regular 3M Scotchcast kits with the exception of the molded plastic forms. Multi-mold kits are supplied with wrap-around molds made of polyester film and porous webbing.
Typical Applications
The Scotchcast splicing kits are the proven way to protect wire splices from moisture and corrosion. They are ideal for impressed current cathodic protection systems which use anode header cables. The Scotchcast resin contained in the kits is rated up to 1000 volts. The resin cures in 30 minutes at temperature of 60°F and above.
82-A1
Scotchcast™ 82-A1 In-Line Resin Splicing Kit for Cable O.D. 0.625
82A Series, Voltage Rating up to 5 kV non-shielded, UL 486D listed, File #EI 02356
Use the 82A series kits to insulate and moisture-seal single conductor, non-shielded cables through 5 kV and multi-conductor cables through 1000 V. Each kit contains a snap-together mold body which fits around the splice, two funnels, tape for sealing mold ends and Scotchcast 4 epoxy electrical insulating resin in a Unipack™ container for clean and easy handling.
These kits may be used for above ground or direct burial applications.
Specifications:
- Max. Voltage Rating: 5 kV
- Conductor Size: 2 AWG 30 mm
- Max. Connector Crimped: 0.625” 16 mm
- Max. Conn OD: Sleeve Type: 0.406” 10 mm
- UPC: 25024
82-A2
Scotchcast™ 82-A2 In-Line Resin Splicing Kit for Cable O.D. 1.0
82A Series, Voltage Rating up to 5 kV non-shielded, UL 486D listed, File #EI 02356
Use the 82A series kits to insulate and moisture-seal single conductor, non-shielded cables through 5 kV and multi-conductor cables through 1000 V. Each kit contains a snap-together mold body which fits around the splice, two funnels, tape for sealing mold ends and Scotchcast 4 epoxy electrical insulating resin in a Unipack™ container for clean and easy handling.
These kits may be used for above ground or direct burial applications.
Specifications:
- Max. Voltage Rating: 5 kV
- Conductor Size: 2 3/0 AWG 35 to 80 mm
- Max. Connector Crimped: 1.0” 25 mm
- Max. Conn OD: Sleeve Type: 0.625” 16 mm
- UPC: 25032
82-A3
Scotchcast™ 82-A3 In-Line Resin Splicing Kit for Cable O.D. 1.563
82A Series, Voltage Rating up to 5 kV non-shielded, UL 486D listed, File #EI 02356
Use the 82A series kits to insulate and moisture-seal single conductor, non-shielded cables through 5 kV and multi-conductor cables through 1000 V. Each kit contains a snap-together mold body which fits around the splice, two funnels, tape for sealing mold ends and Scotchcast 4 epoxy electrical insulating resin in a Unipack™ container for clean and easy handling.
These kits may be used for above ground or direct burial applications.
Specifications:
- Max. Voltage Rating: 5 kV
- Conductor Size: 3/0 AWG 90 to 200 mm 400 KCMIL
- Max. Connector Crimped: 1.563” 40 mm
- Max. Conn OD: Sleeve Type: 1.0” 25 mm
- UPC: 25040
3M Scotchcast Resin/Splice Kits - Ocean Innovations
Scotchcast 82-A Series Inline Resin Splice Kits, 3-2 AWG, 3M Electrical Scotchcast 82-A Series Inline Resin Splice Kits , Width [Nom]: 0 in, Includes
3M Scotchcast 82-A2 Inline Resin Power Cable Splice Kit, 5kV Voltage, 2 to 3/0 AWG Conductor
3M 3/C Low Voltage Splice Kit 5731, CN/JCN Shielding, 600, 52% OFF
3M Resin In-line Splice Kits – MESA
3M Splices & Accessories
3M Resin In-line Splice Kits – MESA
3M Resin In-line Splice Kits – MESA
3M Splices & Accessories
3M™ Scotchcast™ Cold Shrink Inline Splice Kits 5750 Series
3M Scotchcast Inline Resin Splice kit 82-A3N, 1-5 kV, Non-Shielded,10/case 61343 Industrial 3M Products & Supplies
starter kit gomma siliconica e resina trasparente
KIT VETRORESINA PER RIPARAZIONI/MODELLISMO 1KG - Color Point
Kit di resina epossidica trasparente in 2 parti per principianti - 470ml – SFXC
- Uova Di Plastica Di Pasqua - Spedizione Gratuita Per I Nuovi Utenti - Temu Italy
- Apparecchio acustico per anziani, apparecchi acustici ricaricabili, dispositivo amplificatore invisibile con cancellazione del rumore per perdita dell'udito, batteria da 15 ore
- SaharaCase Bi-Fold Folio Case for reMarkable 2 Black TB00342 - Best Buy
- Bidone metallo tortora opaco 35L
- Banded Transparent Polaroid Photo Album (S)
- ▻ Panasonic ER GB60 K503 => leggi la recensione del tagliacapelli!