ELEGOO Mercury XS Bundle Washing and Curing Station – ELEGOO Official

Elegoo Mercury XS Bundle

The transparent cover of the curing machine can block up to 99.9% of ultraviolet rays to improve resin solidification rate and protect your eyesight

【PRE-OWNED GOOD USED】ELEGOO Mercury XS Bundle w/ Separate Washing Curing Station

ELEGOO Mercury Plus 2.0 Large Wash and Cure Machine for LCD/SLA/DLP 3D Printing Models Cure Box with Rotary Curing Turntable and Washing Bucket

Operation instructions: After the model is printed, please clean and blow-dry the model before putting it into the curing machine. If the model become yellow after curing, please adjust the curing time. Over curing will lead to a yellowing model. The recommended ambient temperature is 0-40 degrees, and the ambient humidity is 20%-50%. To avoid overheating of the curing cabinet, please do not use it for more than 40 minutes at a time.

ELEGOO Mercury Xs Bundle with Separate Washing and Curing Station for Resin 3D Printed Models Yellow

ELEGOO Mercury XS Bundle Wash and Cure Machine

ELEGOO Mercury X Bundle, Wash and Cure Station Simultaneous Working Add Bottom Light Source Fresnel Lens for LCD MSLA DLP 3D Printers UV Curing Box

The scratch-resistant tempered glass above the liquid crystal display display screen with 9H hardness for better mild transmission and safety Fresnel

ELEGOO Saturn 2 MSLA 3D Printer and ELEGOO Mercury XS Bundle with Separate Washing and Curing Station

ELEGOO Mercury Plus 2.0 Wash and Cure Station, Upgraded 2 in 1 Design Washing UV Resin Curing Machine with Washing Container and Busket for LCD/DLP/SLA Mars Photon S Photon Mono 3D Printed

Operation instructions: After the model is printed, please clean and blow-dry the model before putting it into the curing machine. If the model become yellow after curing, please adjust the curing time. Over curing will lead to a yellowing model. The recommended ambient temperature is 0-40 degrees, and the ambient humidity is 20%-50%. To avoid overheating of the curing cabinet, please do not use it for more than 40 minutes at a time.

ELEGOO Mercury Xs Bundle with Separate Washing and Curing Station for Resin 3D Printed Models Yellow

ELEGOO Mercury XS Bundle with Separate Wash and Cure Station for Large Resin 3D Printed Models, Compatible with Saturn and Mars LCD 3D Printers, with a Handheld UV Lamp : Industrial

Operation instructions: After the model is printed, please clean and blow-dry the model before putting it into the curing machine. If the model become yellow after curing, please adjust the curing time. Over curing will lead to a yellowing model. The recommended ambient temperature is 0-40 degrees, and the ambient humidity is 20%-50%. To avoid overheating of the curing cabinet, please do not use it for more than 40 minutes at a time.

ELEGOO Mercury Xs Bundle with Separate Washing and Curing Station for Resin 3D Printed Models Yellow

Buy Anycubic Wash & Cure Plus Machine

Anycubic Wash & Cure Max Review: Large Volume Station

Phrozen Wash and Cure Kit - which also dries 😁

Creality UW-02 3D Resin Washing & Curing Station

ANYCUBIC Wash & Cure Plus is Perfect for 3D Printing